电催化氮气还原合成氨催化材料研究进展

氨是纺织、制药、化肥等领域重要的化工原料，也是一种清洁的能源载体，需求量大。目前氨的工业生产主要为Haber-Bosch法，反应条件严苛，能源消耗大且碳排放较高。电催化氮气还原(NRR)合成氨是一种在常温常压下进行的反应，工作电位低，且电能可通过清洁能源提供，是一种很有潜力的合成氨新工艺。但目前电催化NRR材料的产氨速率和法拉第效率低、工作稳定性不够高、溶液中痕量氨的定量检测困难及检测标准不统一等都为其发展带来了巨大挑战。本文首先介绍了电催化NRR的反应机理和常用研究方法，然后重点梳理了2019年以来NRR催化材料的最新研究进展，最后对该领域研究面临的挑战和机遇进行了展望。     

Composite fibers of La0.5Sr0.5CoO3-δ-LaSrCoO4±δ with high catalytic activity toward oxygen reduction reaction

To promote catalytic activity toward oxygen-reduction reaction in the intermediate temperature solid-oxide fuel cells, we prepared a dual-phase composite cathode material 75 mol%La0.5Sr0.5CoO_3-δ-LaSrCoO_4±δ with a fibrous structure via one-pot electrospinning of a polymer containing solution. We then investigated the micro-structure and electrochemical performance of this fibrous composite. The results confirm that the fibrous composite is composed of intimately mixed nano-crystalline grains and that the compositional phases are compatible with each other. Compared with the corresponding single-phase fibers, the nano-crystalline size of the composite is more stable, and the fine nano-crystalline grains are more resistant to growth and coarsening, indicating the mutual dispersion and suppression between the constituent phases. Furthermore, compared with the corresponding single-phase fibers, the electrochemical performance of this fibrous composite cathode is more favorable. At 800 °C, its area specific resistance (ASR) is as low as 0.03 Ω cm², and maximum output power density is as high as 960 mW cm⁻², which is achieved from an electrolyte-supported single cell that was developed using this cathode. After aging this cathode for a long time, ASR is less worsened and the output power density decreases only slightly, indicating that the prolonged electrochemical performance in the running cells is more stable.     

Size-controlled synthesis of Mo powders via hydrogen reduction of MoO2 powders with the assistance of Mo nuclei

The size-controlled preparation of Mo powders is always a challenge and important task in the molybdenum metallurgy. In the current study, Mo powders with controllable sizes are synthesized by hydrogen reduction of MoO₂ powders with the assistance of Mo nuclei in the range of 900–1100 °C. The influences of the particle sizes of Mo nuclei, the additive amount as well as reaction temperature on the morphology and particle sizes of the final products are studied. For the hydrogen reduction of MoO₂ without any additive, the obtained Mo powders always have large particle sizes. However, the addition of small amounts of nuclei in MoO₂ can help Mo nucleate dispersedly, and the growth of Mo could be also controlled by adjusting the sizes of added nuclei, amount of addition and the reaction temperature. With the addition of Mo nuclei, the different sizes of Mo powders with the good dispersity can be prepared. As adding commercial Mo powders with the particle size of about 2.03 μm, the micron-sized Mo powders ranged from 2.11 μm to 3.25 μm could be prepared. While for the case of adding ultrafine Mo nuclei of about 170 nm, Mo powders from 0.28 μm to 0.88 μm can be obtained. Moreover, the more the amounts of nuclei added and the lower the reaction temperature (in the range of 900–1100 °C) is, the smaller the particle size of the prepared Mo powder will be. The current method is a facile and feasible method, and is potential to be used for industrial production of Mo powder with controllable particle sizes.     

Drag Reduction by Wormlike Micelles of a Biodegradable and Non-Biodegradable Surfactants

This study describes the effects of wormlike micelles formed by the commercial surfactants tallowalkylamidopropyl dimethylamine oxide (Aromox APA-TW) and oleyl methyl bis(2-hydroxyethyl) ammonium chloride (Ethoquad O/12) as drag reducers. Ethoquad O/12 is immune to degradation by heat and microorganisms. Conversely, Aromox APA-TW is biodegradable in the environment, and its susceptibility to heat-induced degradation was previously assessed. This work considers the effects of temperature, salt, and time on the drag-reduction capacity (in different Reynolds number) of wormlike micelles of these two surfactants. Wormlike micelles formed by Aromox APA-TW are able to reduce drag at higher temperatures compared to wormlike micelles formed by Ethoquad O/12. However, Aromox APA-TW can degrade after being heated to 80 °C and also after storage of the wormlike micelle solutions. Ethoquad O/12 does not undergo degradation after being heated or stored. These surfactants have the potential to be used as additives in industrial operations, as the wormlike micelles formed are able to reduce drag in systems with long pumping distances or recirculation, even in solutions with high salt concentrations (brine) and high temperatures.     

煤与不同原料重整气化制甲醇对CO2排放的影响

通过介绍煤制甲醇对整个煤化工行业CO2排放的影响,选择以煤制甲醇工艺CO2排放为研究对象,分别叙述了煤气化制合成气,煤与天然气、煤与焦炉气以及煤与重质油重整气化制合成气联合生产甲醇过程中,吨甲醇产品工艺CO2排放情况,探讨不同煤气化形式对工艺CO2排放的影响因素,为如何通过气化工艺选型,降低煤制甲醇生产过程中工艺CO2排放量提供理论判断依据。     

节能减排的颜料印染与助剂(一)

颜料印染对当前印染行业节能减排,降低能耗很有意义,但要做到对纤维没有亲和力的颜料印染,必需制备润湿性、分散性良好的超细颜料粒子。重点阐述利用各种表面活性剂和助剂制备出一种包覆阴离子的超细粒子的稳定分散液,包括各种润湿剂、分散剂、黏合剂和纤维阳离子改性剂,还概述了相关基础理论。     

1 200 MPa级冷轧先进高强钢轧制稳定性的分析及控制

针对1 200 MPa级冷轧先进高强钢轧制不稳定问题,对热轧原料组织性能均匀性、冷轧压缩比、冷连轧机组轧制策略等进行了分析。结果表明,热轧工序投入边部加热器,采用分段冷却等手段,可有效降低热轧原料头尾部组织性能差异,保证通卷性能均匀,进而保证通卷轧制过程稳定;通过优化冷连轧机组压缩比,可有效降低材料本身的加工硬化强度,进而避免连轧机组后面机架的轧制超负荷情况;通过优化冷连轧机组轧制策略,可保证轧制过程中各机架均匀变形,避免出现轧制力差异较大的情况,进而保证轧制过程稳定。采用上述措施,1 200 MPa级冷轧先进高强钢轧制力控制在约15 000 kN,厚度精度控制在±0.06 mm以内,可保证该级别高强钢的稳定轧制。     

Fe–N–Si tri-doped carbon nanofibers for efficient oxygen reduction reaction in alkaline and acidic media

The most ideal substitute for Pt/C to catalyze the oxygen reduction reaction (ORR) is the transition metal and nitrogen co-doped carbon-based material (TM-N-C). However, large particles with low catalytic activity are formed easily for the transition metals during high-temperature carbonization. Herein, PAN nanofibers uniformly distributed with FeCl₃ were coated with SiO₂ and then carbonized to obtain Fe–N–Si tri-doped carbon nanofibers catalyst (Fe–N–Si-CNFs). The SiO₂ can further anchor the Fe atoms, thus preventing agglomeration during the carbonization process. Meanwhile, Si atoms have been doped in CNFs during this process, which is conducive to the further improvement of catalytic performance. The Fe–N–Si-CNFs catalyst has a 3D network structure and a large specific surface area (809.3 m² g⁻¹), which contributes to catalyzing the ORR. In alkaline media, Fe–N–Si-CNFs exhibits superior catalytic performance (E_1/2 = 0.86 V vs. RHE) and higher stability (9.6% activity attenuation after 20000s) than Pt/C catalyst (20 wt%).     

双盘式磁力耦合器振动噪声分析与实验研究

为了在双盘式磁力耦合器设计阶段分析振动噪声特性,优化双盘式磁力耦合器设计,提出了一种利用模态叠加原理来分析其振动噪声的方法。双盘式磁力耦合器具有高转矩密度与高效率等优势,因此逐渐发展成为煤矿机械柔性传动装置。由于双盘式磁力耦合内部的转子磁场非正弦分布以及涡电流谐波等因素影响,双盘式磁力耦合器输出转矩中不可避免的存在波动。若根据计算得出的双盘式磁力耦合器的电磁振动噪声特点,在设计时选取振动噪声小的参数进行优化组合,可在实际中降低其电磁振动及噪声,有利于减少制造成本。本文结合双盘式磁力耦合器的结构特征,提出了一种模态叠加响应法计算电磁振动噪声,建立了其电磁径向力的解析模型,并在多物理场耦合作用下分析主要电磁径向力波在工作频率内的谐波响应,最后在额定功率为55 kW双盘式磁力耦合器实验台上进行试验验证。基于麦克斯韦张量法,建立了双盘式磁力耦合器的径向电磁力解析模型,并得出0阶与10阶电磁径向力波是产生振动噪声的最主要原因;利用多物理场耦合分析法进行谐波响应NVH特性分析,结果显示0阶力波的振动加速度与形变量均大于10阶力波的振动加速度与形变量,因此双盘式磁力耦合器的电磁振动主要来源于0阶力波;在额定功率为55 kW,最高转速为1 500 r/min的双盘式磁力耦合器实验台进行振动测试,试验结果显示在1 500 r/min时,试验得出的最大振动峰值及频率约为35 m/s^2和4 950 Hz,与有限元仿真结果的误差对应为6.3%和1.1%;而当变频电机的输入转速依次增大时,振动加速度的理论值、仿真值与试验值的曲线形态较为接近,误差较小;噪声估计值与实测值的最大误差仅为8.9%,基本验证了本文所提出模态叠加法的正确性。     

A two-stage vision-based method for measuring the key parameters of ball screws

Ball screws are crucial for improving the reliability and interchangeability of transmission mechanical systems; however, existing contact measurement methods that utilise stylus contact are not efficient, which precludes their use for rapid in-situ geometry evaluation. This paper presents a vision-based two-stage method for rapid measurement of key parameters (raceway arc radii and centre distance) of ball screws. The edge contour information is extracted from the acquired image using the dual-tree complex wavelet transform and non-maximal suppression. In the matching stage, a shape-matching algorithm is used for detecting approximate geometrical centres of raceway arcs. The refinement stage, on the other hand, is implemented for acquiring precise dimensional results. Furthermore, the method of averaging multiple measurements is performed to suppress random noise. A comparative experiment is presented to validate the robustness of the proposed method. Based on experimental results, the calculated mean absolute errors in the measurement of the two raceway arc radii and the centre distance are found to be 0.0082 mm, 0.0079 mm and 0.0055 mm, respectively. This study therefore paves the way for key parameter measurement without removing ball screws.